The GSM auto dialer offers Tri-Band 900/1800/1900 GSM/GPRS system that adopts SIMCOM 300 module it is R&TTE and GCF approved.
Can combine with normal phone set, FAX machine, security console or IP voice route transfer to GSM call-out.
Backup line function, in case of disconnect the PSTN it can auto dial divert function
When the PSTN phone line is disconnected, it will automatically dial and send SMS message.
6 LED indicators for Power On/Off, GSM, TEL, GSM on-line, TEL on-line and system fault.
Built-in 16 x 2 digits LCD display for display temperature, phone number and SMS data.
Can pre-set save 9 speed dialer phone number and 4phone number to call-out send SMS.
Can call-in send SMS to setup function and request to reply the phone number and user data.
Built-in Input NC/NO terminal allows connection to wire type sensors, security console or panic buttons to active call-out and sent SMS (ALARM1 and ALARM2).
Built-in rechargeable back-up battery, Tamper Switch and Power Failure Detector function to auto call-out report SMS.
With 5 channel call-in SMS to turn on/off switch by wireless control FS172 AC power switch.
It can support remote controller, wireless sensors detector and wireless external siren.
It can save total 80pcs wireless accessories ID code in EEPROM.
1When the FS230GSM received alarm event that will call-out report SMS with alarm event, sensor number and user name address data.
